Laser Calibration Test Files to improve all parameters of your machine and go! No matter the machine, this all in one test is compatible with all power ratings & all laser’s that support Lightburn. With this lasercut files you will make your machine do a better job.
It includes a complete 22-page instruction manual that describes in detail each test that the laser will perform, as well as how to interpret the results and make use of them, so that you can substantially improve the cutting and engraving quality of your laser. This will help you understand how your machine works and how to adjust it to perform at its best. We will also offer you personalized help and support for any questions you may have.
We include a total of 11 tests files for the following power ratings: 5-10W, 10-20W ( mm/min ), 10-20W ( mm/sec ), 20-30W ( mm/min ), 20-30W ( mm/sec ), 30-40W, 40-60W, 50W-SPECIAL, 60-80W, 80-100W, 100-150W.
Each laser is unique. Don’t risk your project with someone else’s settings. Test and find the perfect ones for you now! This calibration pack will guide your laser through a range of settings, helping you pinpoint the best settings!
This All In One Bundle Includes: • Material Test for CO2 & Diode: To check the settings of cut and engraving power of your laser machine. Valid for all models of diode and CO2. Compatible with all laser’s that support Lightburn, any lasers. Running this test will not only save you a lot of time but also a lot of wasted test material.
• Offset Test: Your engravings are a mess? it looks like your machine doesn't have enough resolution? We know this problem and you will be surprised when you calibrate this setting on your machine. It is something that many people who are new to the industry are not aware of and that is why their engravings are of very poor quality. Learn how to calibrate these values thanks to this article.
• Image Engrave Test: Make your photos look spectacular thanks to this test. This test will help you determine the best settings for perfect image engraving on the material on which you run the test.
• Kerf Calibration + Kerf Meter: Are your cuts inaccurate? This test will solve this problem for you. The test will allow you to know your kerf value and calibrate it in the blink of an eye.
• Cross Test: If your laser makes inconsistent lines or the circles do not close, thanks to this test you will be able to check the correct functioning of the mechanical part of your machine.
• LPI Test: When engraving with high precision, it is necessary to know the correct interval value to use so that the engraving is not performed inconsistently. This test will help you to improve your precision engravings.
• Focus Test: The ramp test or focus test is a method to check if the focal length between the laser head is correct. Do more accurate jobs and make better use of your laser's power by properly adjusting the focal length of your machine.
• Material Flex Test: Check the flexibility of the material you are using with this useful test. This will be useful to check the possibilities of the material you will use in your projects.
This file package will allow you to do a complete calibration of your machine and also may help you to: • Calibrate the settings for your laser. • Engrave photos with excellent results after running this test. • Check the appropriate values for cutting or engraving a new material. • Have a reliable sheet to go to check your printing values. • Engrave vectors with much higher quality/resolution. • Avoid wasting time and materials. • Make sure your machine is functioning at its maximum capacity. • Make much more precise cuts. • Extend the lifetime of your laser. • Help you get started quick and easy.
The project measures 21X20cm & the file package include: 5-10W Test Files: • 5-10W-min-Lamas-Calibration-Kit.lbrn2 • 5-10W-min-Lamas-Calibration-Kit.lbrn
10-20W mm/min Test Files: • 10-20W-min-Lamas-Calibration-Kit.lbrn2 • 10-20W-min-Lamas-Calibration-Kit.lbrn
10-20W mm/sec Test Files: • 10-20W-Lamas-Calibration-Kit.lbrn2 • 10-20W-Lamas-Calibration-Kit.lbrn
20-30W mm/min Test Files: • 20-30W-min-Lamas-Calibration-Kit.lbrn2 • 20-30W-min-Lamas-Calibration-Kit.lbrn
20-30W mm/sec Test Files: • 20-30W-Lamas-Calibration-Kit.lbrn2 • 20-30W-Lamas-Calibration-Kit.lbrn
30-40W Test Files: • 30-40W-Lamas-Calibration-Kit.lbrn2 • 30-40W-Lamas-Calibration-Kit.lbrn
